How to configure the control of izzi to the tv
Welcome to this detailed and simple tutorial where we will explain step by step «How to Set Up the Control of Izzi to the TV«. Izzi is one of the leading telecommunications service providers in Mexico and, like any good service, it needs proper configuration to work perfectly. Attaching the Izzi remote to your TV not only simplifies your viewing experience, but also makes access to various functions much faster and more convenient. In this guide we explain how to do it in the simplest and most effective way possible. Let's get started!
Understanding Izzi Control Before Setting It Up To The TV
- Knowing your Izzi control: Before proceeding with setup, it is important to understand how your Izzi control works and what buttons it has. Each button has a specific function and must be used correctly. Take a few minutes to get to know each one.
- Preparation: Make sure you have the batteries installed correctly in your Izzi controller. If your controller is new, be sure to remove the safety tab that protects the batteries.
- Code for your television: Each television model has a unique code to synchronize with the Izzi control. You can find this code in your television's instruction manual or search for it online.
- Once you have the code, you can begin setting up your Izzi control. Turn on your television and stand a reasonable distance away to carry out the setup.
- Synchronization process: Begin the pairing process by pressing the power button and the TV button at the same time until the power button flashes twice. Then, enter the code for your television using the number keys. The power button will flash two more times to confirm that the setup was successful. Otherwise, the power button will flash four times, telling you to start the process again.
- Test run: With the Izzi control already configured, we will perform some functional tests. Press the volume button to check if the setup was really successful. If the volume goes up or down, the control has been properly synchronized with your television. If he does not respond, the process will have to be repeated.
- Finally, remember that every time you change the batteries, it may be necessary to reconfigure the Control From Izzi to The TV.
This guide to How to Set Up the Izzi Control on the TV It will allow you to configure your control in a few minutes. However, if you are having difficulties, it is recommended that you contact Izzi technical support for further assistance.
FAQ
1. How can you configure the Izzi control to manage your TV?
- First, turn on your TV and your Izzi box.
- Press the key SETUP on your Izzi controller until the LED indicator stays on.
- Then, press the button TV.
- Enter the code corresponding to your brand of TV. The codes can be found in the user manual of your Izzi control.
- Finally, press the key POWER in control. If your TV turns off, this means you have successfully established Izzi control to your TV.
2. What are the codes to configure the Izzi control with my TV?
The specific codes vary depending on the brand of your television. Check the user manual that came with your Izzi control, or search online on the Izzi website for codes for the most common TV brands.
3. What if the first code doesn't work on my Izzi control?
If the first code doesn't work, you can try with the remaining codes for your television brand. Izzi controls have multiple codes for each brand due to different TV models.
4. What happens if none of the codes work with my TV?
If none of the codes work, you can use the automatic code search. Follow similar instructions as before, but instead of entering a specific code, press CH+ or CH- until your TV turns off.
5. What is automatic code search?
Automatic code search is a feature of the Izzi remote control that allows you to control automatically cycle through all codes available until you find the one that is compatible with your TV.
6. How do I reset my Izzi controller to factory settings?
- Press the key SETUP on your Izzi controller until the LED stays on.
- Press 9-8-1.
- The LED will flash twice, this means that your Izzi control has returned to its factory settings.
7. Can my Izzi Remote control other devices besides my TV?
Yes, your Izzi control can not only control your TV, but also other devices such as DVD players, Blu-ray players and sound systems. However, you will need the specific codes for these devices which can be found in the user manual.
8. How do I set up Izzi control for my DVD or Blu-ray player?
The process is very similar to setting up the control for your TV, but instead of pressing the TV button, press the DVD or BLU-RAY button and enter the code corresponding to your device.
9. How do I set up Izzi control for my sound system?
Similarly, to configure your sound system, press the button AUDIO on the control and then enter the code corresponding to your sound device.
10. Where can I find more help if I can't set up the Izzi control?
If you are having trouble setting up your Izzi control, you can call Izzi customer service for additional assistance or check out their website to find detailed guides and helpful resources.