How to change the glass of the iPhone 6


Hardware
2024-01-17T20:06:45+00:00

How to change the glass of the iphone 6

How to change the glass of the iPhone 6

If you've been unlucky enough to break the glass on your iPhone 6, don't worry, you can fix it yourself! ‍ Change the glass of the iPhone 6 It's a task that may sound intimidating, but with the right tools and a little patience, you'll be able to do it without a problem. In this article, we'll guide you step by step through the process so you can replace the ⁢broken glass of your iPhone 6‍ like‌ a professional. You don't need to be a phone repair expert to do this, just follow our instructions and your phone will be like new in no time!

– Step by step --‍ How to change the iPhone glass⁤ 6

  • Step 1:Gather⁤ the necessary materials: To change the glass on the iPhone 6, you will need a new replacement glass, a pentalobe screwdriver, a suction cup to lift the screen, an opening blade, a plastic card and a hair dryer.
  • Step 2:Turn off the iPhone: Before you begin, be sure to completely turn off your iPhone 6.
  • Step 3:Remove the screws: Use the pentalobe screwdriver to remove the two screws located around the charging connector.
  • Step 4:Use the suction cup: ⁣Place⁤ the suction cup on⁣ the bottom⁢ of the screen and gently pull to lift it slightly.
  • Step 5:Use the opening blade⁤: ​Slide the opening blade⁣ between the frame and the screen to carefully separate it.
  • Step 6:Remove the components: ‌ Carefully lift the screen⁣ and remove⁣ the screws holding the ⁤fingerprint sensor cable.
  • Step 7:Replace the glass: Carefully remove the damaged glass and place the new glass in its place.
  • Step 8:Reassemble: Replace the components and screws in the reverse order in which you removed them.
  • Step 9:Turn on the iPhone: After you've put everything back together, turn on your iPhone 6 and make sure the new glass is working properly.

FAQ

What tools do I need to change the glass on the iPhone 6?

  1. Pentalobe screwdriver.
  2. Suction cup to remove the screen.
  3. Tweezers.
  4. Blade to remove the screen.
  5. New replacement glass.

How to disassemble the iPhone 6 screen?

  1. Turn off the iPhone ‌and remove the screws from the bottom panel.
  2. Use a suction cup to lift the screen while sliding the blade to remove it.
  3. Disconnect the flexible cables that connect the screen to the rest⁤ of the phone.

How to change the glass on the iPhone 6 step by step?

  1. Once the screen is removed, carefully remove the broken glass.
  2. Clean the surface well to make sure any residue is removed.
  3. Place the new glass precisely and fix it correctly.

Where to ⁢buy a new glass⁤ for the iPhone 6?

  1. Online search for stores specializing in phone parts.
  2. Visit electronic device repair stores.

How much does it cost to change the iPhone 6 glass?

  1. The cost may vary depending on the store or parts supplier.
  2. On average, the price can be between $30 and $100⁢ dollars, depending on the quality⁤ of the glass and the⁢ location of repair.

Is it possible to change just the glass on the iPhone 6 without having to buy a complete screen?

  1. Yes, it is possible to change only the glass if it is done with the appropriate tools and you have experience in repairing electronic devices.
  2. It is important to note that this procedure can be delicate and requires a lot of precision.

What precautions should I take when changing the iPhone 6 glass?

  1. Completely turn off the phone before starting any procedure.
  2. Work in a clean, well-lit area to avoid losing or damaging small parts.
  3. Be careful when handling the blade to remove the screen to avoid accidental cuts or damage.

How long⁢ does it take to change the iPhone 6 glass?

  1. The time required may vary depending on the experience level of the repairer.
  2. On average, it may take 1 to 2 hours to complete the glass change.

Is any prior technical knowledge required to change the iPhone 6 glass?

  1. It is advisable to have basic knowledge about disassembly and assembly of electronic devices.
  2. If you do not have previous experience, it is advisable to look for tutorials or ask a professional for help.

What should I do if after changing the glass on the iPhone 6 the screen does not work correctly?

  1. Verify that all cables are correctly connected and in place.
  2. If the problem persists, seek help from a mobile phone repair professional.

You may also be interested in this related content:

Related