How to Replace iPhone 5 LCD Screen
How to replace iPhone 5 LCD screen: If you have encountered the unfortunate situation that the LCD screen of your iPhone 5 has broken, don't worry. In this article, we will show you how to replace the LCD screen of your iPhone 5 in a simple way, without having to go to a specialized technical service. You'll save time and money by following these easy and friendly steps, so let's get to work!
– Step by step -- How to replace the iPhone 5 LCD screen
- Step 1: Gather the necessary materials:
- 1 Pentalobe screwdriver
– 1 suction cup
– 1 opening clamp
– 1 plastic spatula
– 1 new LCD screen for iPhone 5. - Step 2: Turn off your iPhone 5 and make sure to disconnect all cables, headphones, and SIM cards.
- Step 3: Use the Pentalobe screwdriver to remove the two screws on the bottom of the iPhone 5, right next to the charging connector.
- Step 4: Using the suction cup, place it on the bottom of the screen and gently pull it up to lift the iPhone 5 screen.
- Step 5: Hold the screen with the opening clamp and separate the rest of the phone case using gentle pressure. Make sure not to pull too hard, as this can damage the internal cables.
- Step 6: Disconnect the control panel cables from the motherboard. You can use the plastic spudger to gently pry and unlock the cables.
- Step 7: Remove the screws holding the metal screen support. These screws are small, so be sure to store them in a safe place so they don't get lost.
- Step 8: Carefully remove the metal support and place it next to the screws. Then, remove the old screen and dispose of it properly.
- Step 9: Take the new LCD screen and place it in place, making sure to align the connectors correctly.
- Step 10: Replace the metal support and the screws that hold it.
- Step 11: Reconnect the control panel cables to the motherboard. Make sure they are well placed and secure.
- Step 12: Carefully place the screen back into the iPhone 5 case and apply light pressure to secure it in place.
- Step 13: Replace the two screws on the bottom of the iPhone 5, right next to the charging connector.
- Step 14: Turn on your iPhone 5 and check if the LCD screen is working properly.
FAQ
1. What are the tools needed to replace iPhone 5 LCD screen?
- Pentalobe screwdriver
- suction cup
- Plastic lever
- Tweezers
- Phillips screwdriver
- flat blade screwdriver
2. How to disassemble iPhone 5 before replacing LCD screen?
- Turn off the iPhone and remove the SIM and memory cards.
- Remove the two pentalobe screws on the bottom of the iPhone.
- Use the suction cup to gently lift the front screen.
- Use the plastic lever to separate the connector from the screen and open the iPhone.
- Carefully disconnect the cables from the motherboard.
3. How to remove the defective LCD screen of iPhone 5?
- Remove the security screws that hold the metal protector of the LCD screen flex cable.
- Disconnect the flex cable from the motherboard and remove the metal protector.
- Disconnect the front camera and proximity sensor cables.
- Remove the screws holding the fingerprint sensor connector protection plate.
- Gently disconnect the fingerprint sensor connector cable and remove the iPhone 5 LCD screen.
4. How to install the new LCD screen on iPhone 5?
- Connect the fingerprint sensor connector cable to the protection board.
- Place the LCD screen in place and fix the screws on the fingerprint sensor connector protection plate.
- Connect the front camera and proximity sensor cables.
- Place the metal protector of the LCD screen flex cable and secure it with the security screws.
- Connect the flex cable from the LCD screen to the motherboard.
5. How to assemble iPhone 5 again after replacing LCD screen?
- Carefully reconnect the cables to the motherboard.
- Align the top edges of the screen with the frame and press to snap it into place.
- Replace the two pentalobe screws on the bottom of the iPhone.
- Insert the SIM and memory cards again.
- Turn on the iPhone and verify the operation of the new LCD screen.
6. Where can I buy a replacement LCD screen for iPhone 5?
- You can buy a replacement LCD screen for the iPhone 5 at specialty electronics stores.
- You can also find them online, on websites that sell spare parts for mobile phones.
7. How long does it take to replace the iPhone 5 LCD screen?
- The time needed to replace iPhone 5 LCD screen may vary, but generally takes around 30 minutes to 1 hour.
- More time may be necessary if you are inexperienced or if you encounter difficulties during the process.
8. Is technical knowledge required to replace the iPhone 5 LCD screen?
- No advanced technical knowledge is required, but it is advisable to have a certain level of familiarity with opening electronic devices and following detailed instructions.
- If you don't feel safe, it is best to seek professional help.
9. Can I replace the iPhone 5 LCD screen myself?
- Yes, it is possible to replace the iPhone 5 LCD screen yourself if you have the right tools and carefully follow the necessary steps.
- Remember to use caution and patience during the process to avoid damaging other components.
10. Will I lose the warranty on my iPhone 5 if I replace the LCD screen myself?
- Yes, normally the iPhone 5 warranty is void if any component replacement is performed by the user.
- However, it is always advisable to check the specific warranty terms of your device before making any changes to its components.
You may also be interested in this related content:
- Solution to Slow Problems in Kindle Paperwhite.
- How to reset Epson printer
- What are the basic components of a computer equipment?