If⁤ you've ever been stranded in the middle of nowhere with your vehicle broken down, you'll know how frustrating⁢ it can be. In these situations, having a jumper cable It can be the difference between reaching your destination or spending hours waiting for the tow truck to arrive. Learn to make a bridge to a car It is an essential skill that every driver should master.

Before you begin, it is important to make sure ⁢that you have the necessary items: a set of⁤ jumper cables and another vehicle with a charged battery. Jumper cables are usually red and black, and have clips on each end to connect them to the batteries.

Prepare the vehicles

Place both vehicles close to each other, without them touching. Make sure they are in Deadpoint or in parking position and with the handbrake activated. Turn off all electrical devices in both cars, such as the radio, air conditioning, and lights.

Identify batteries

Open the hood of both vehicles and locate the batteries. In most cases, the battery⁢ is located in the engine compartment, although on some models it may be located in the trunk. Identify the positive (+) and negative (-) terminals of each battery.

Connect the jumper cables

1. Connect a red clamp to the terminal positive (+) of the discharged battery.
2. Connect the other red clamp to the ⁤terminal positive (+) of the charged battery.
3. Connect a black clamp to the terminal negative (-) of the charged ‌battery.
4. Attach the other black clamp to an unpainted metal part of the vehicle's engine with a discharged battery, away from the battery and any moving parts.

Start the vehicle

Start the vehicle engine with the battery charged and leave it running for a few minutes. Then, try⁤ to start the vehicle with a dead battery. If the engine starts, let it run for a few minutes to allow the battery to partially recharge.

Disconnect jumper cables

Remove the jumper cables in the reverse order you connected them. First, disconnect the black clamp from the ground point of the vehicle with the discharged battery, then the black clamp from the charged battery. Next, disconnect the ⁤red clamp⁢ from the charged battery and, finally, the red clamp from the discharged battery.

Remember, if your vehicle's battery discharges frequently, it may be an indicator of a more serious problem, such as a Alternator defective or an old battery. In these cases, it is advisable to take your car‌ to a mechanic shop for proper diagnosis and repair.

Learn to ⁢make a bridge to a car It's a valuable skill that can save you time and money in emergency situations. Always keep a set of jumper cables in your vehicle and familiarize yourself with the process so you're prepared when needed.