If you have just purchased a new Surface Laptop GO or if you need to reboot the system, it is important to know how to boot it correctly. Fortunately, the process is quite simple and quick. In this article, we will provide you with the necessary steps to boot your Surface Laptop GO in a few minutes. Keep reading to discover how to perform this simple procedure and start enjoying your new device.

Step by step -- How to boot a Surface Laptop GO?

• Step 1:: First, locate the power button on the Surface Laptop GO. This is located on the keyboard, near the top right corner.
• Step 2:: Once you have located the power button, press and release to turn on the device.
• Step 3:: After you turn on your Surface Laptop GO, wait a few seconds for the operating system to start.
• Step 4:: When you see the Windows logo appear on the screen, enter your password or PIN if required.
• Step 5:: Once you're signed in to your Surface Laptop GO, you will be ready to start using it.

FAQ

1. How to turn on a Surface Laptop GO?

1. Open the lid of the Surface Laptop GO.
2. Press the power button found on the keyboard.
3. Wait for the screen to turn on and display the Windows logo.

2. How to turn off a Surface Laptop GO?

1. Click on the start menu in the lower left corner of the screen.
2. Select “Shut Down” from the drop-down menu.
3. Wait for the device to turn off completely.

3. How to restart a Surface Laptop GO?

1. Click on the start menu in the lower left corner of the screen.
2. Select “Restart” from the dropdown menu.
3. Wait for the device to automatically reboot.

4. How to force restart a Surface Laptop GO?

1. Hold down the power button for at least 10 seconds.
2. Wait for the device to turn off completely.
3. Press the power button again to turn it on.

5. How to access the BIOS on a Surface Laptop GO?

1. Turn off Surface Laptop GO.
2. While pressing the power button, Press and hold the volume down button.
3. The device will reboot and you will enter the BIOS setup.

6. How to boot from USB on a Surface Laptop GO?

1. Connect the USB drive to the Surface Laptop GO.
2. Turn off the device.
3. Press the power button and at the same time press and hold the volume up button.
4. Select “Boot from USB” in the startup settings.

7. How to boot into safe mode on a Surface Laptop GO?

1. Turn off Surface Laptop GO.
2. Press the power button and at the same time hold down the shift key.
3. The device will reboot into safe mode.

8. How to reset a Surface Laptop GO to its factory state?

1. Open Windows Settings.
2. Select "Update & Security".
3. Click on "Recovery".
4. Select “Get Started” under the “Reset this PC” option.

9. How to activate the fast boot option on a Surface Laptop GO?

1. Open Windows Settings.
2. Select "System" and then "Power & Sleep."
3. Click “Additional Power Settings.”
4. Select “Choose the behavior of the start / stop buttons”.
5. Activate the "Fast Boot" option.

10. How to fix boot issues on a Surface Laptop GO?

1. Try to restart the device.
2. Check for pending Windows updates.
3. Run the Windows Troubleshooting Tool.
4. If the problem persists, contact Microsoft support.

You may also be interested in this related content:

• How to block pop-ups in Safari
• How to download videos from a web page
• How to convert WAV files to MP3