How to revive an LG device that won't turn on?


Mobile Phones & Tablets
2023-10-02T09:49:56+00:00

How to revive an LG device that does not turn on

How to revive an LG device that won't turn on?

How to revive an LG device that does not turn on?

Sometimes, we may encounter the frustrating situation that our LG equipment does not turn on. This can be due to several reasons, such as a hardware failure or a software problem. However, before we think about getting rid of our device, there are some solutions that could help us revive it and make it work again. work properly.

One of the possible causes of an LG device that does not turn on is a problem with the battery. If the battery is dead, the device may not respond when you try to turn it on. In this case, the first thing we must do is make sure that the equipment is correctly connected to a power source to charge the battery. It is advisable to use the device's original charger and leave it connected for at least 30 minutes before trying to turn it on again.

Another possible cause of an LG device that does not turn on is a problem with the power button. If the button is stuck or damaged, this may prevent the device from turning on properly. In this case, we can try to gently clean the button with a cotton swab and isopropyl alcohol, making sure not to wet the device excessively. If this does not solve the problem, the power button may need to be replaced at an authorized service center.

Additionally, it is important to check if the LG⁤ equipment has suffered any physical damage. If it has been exposed to water or suffered a hard fall, this may have caused the device to malfunction and not turn on properly. In these cases, it is advisable to take the equipment to an authorized service center for proper inspection and repair.

In conclusion, if our LG device does not turn on, it is important to explore different solutions before considering its replacement. Checking the battery charge, checking the status of the power button, and assessing whether it has suffered any physical damage are key steps in trying to revive our device. If none of these solutions work, it may be necessary to go to an LG equipment repair specialist to diagnose and solve the problem.

1. Check the electrical connection and charger

Check the electrical connection: The first step in trying to revive an LG device that won't turn on is to make sure the electrical connection is working properly. To do this, check if the device is correctly plugged into a power outlet and if the power cable is in good state. Also, check that there are no power outages in your home or that the device is not connected to a faulty outlet.

Check the charger: The second step is to check the status of the charger. Plug the charger into a power outlet and make sure it is working properly. You can do this by checking if the charge indicator LED lights up or by using a voltmeter to measure the output voltage of the charger. If the charger is not working properly, it may need to be replaced.

Check the USB cable: Next, check the condition of the USB cable you use to charge your LG device. Make sure it is not damaged or tangled, as this could affect power transfer and prevent the device from turning on. If you detect any problem with the usb cable, replace it with a new one and make sure it is compatible with your LG device. Remember that it is important to use original or certified cables and chargers to avoid possible damage to the device.

Performing these initial checks will help you identify possible problems related to the electrical connection and charger of your LG device. If after carrying out these checks the device still does not turn on, it is advisable to contact the authorized LG technical service to obtain an appropriate solution. Remember that opening or tampering with the equipment yourself may void the warranty and cause additional damage.

2. Restart the device and try to turn it on again

One of the most common problems that can arise with LG devices is that they do not turn on. If you are faced with this situation, one option you should consider is to restart the device and try turning it on again. This procedure is simple to carry out and can solve the problem in many cases. To restart your LG device, simply press and hold the power button for a few seconds until it turns off completely. Afterwards, wait a few⁢ seconds ‌and then press the button again to turn it on.

If after restarting the device the problem persists and you cannot turn it on, it is advisable to disconnect all cables and peripherals connected to the device. Be sure to disconnect both the power cables, data cables, and USB peripherals. Once disconnected, wait a few minutes before connecting them again. This step will allow the device to completely “reboot” and correct any connection problems that are preventing it from turning on.

If the computer still does not turn on after restarting it and disconnecting the cables, you may need to perform a factory reset.This process will erase all personal data and settings on your computer, so it is important to back up your your files before proceeding. On most LG devices, you can access the factory reset option through the settings menu or by using a key combination when turning on the device. Consult the manual or the LG support page for specific instructions depending on your device model.

Remember that these are just some steps you can follow to try to revive an LG device that won't turn on. In case none of them work, it is advisable to contact LG technical support for specialized help.

3. Check the battery and its charging status

It's frustrating when your LG device won't turn on and you need to use it right away. One of the possible reasons may be a problem with the battery or its state of charge. Therefore, in this post we will show you how to revive your device and use it without problems.

First, Unplug the power cord and remove the battery of ⁤your ⁤LG device. Make sure you do it in a safe way to avoid any damage. Then, visually inspect the battery looking for signs of physical damage such as swelling, leaks, or corrosion. These issues can negatively affect battery performance and cause your device to not turn on.

Once you have verified that the battery has no visible damage, Check its charge using a voltmeter. Turn on the voltmeter and place the red terminal on the positive pole of the battery and the black terminal on the negative pole. The voltmeter should show a reading in volts. If the voltage is lower⁢ than specified by the manufacturer, the battery is probably discharged or defective.

4. Perform a factory reset

If your LG device does not turn on and you have tried all the basic solutions, it may be necessary to solve the problem. This process will erase all data on your device, so it is important to do a Backup before carrying it out. Here we explain how in your team LG:

1. Turns off ⁤the device by holding down the power button until it turns off completely.
2. Keep pressed the power⁤ and volume down buttons at the same time for a few seconds.
3. When the LG logo appears on the screen, loose buttons and then quickly press them again. ⁣This will take you to the Android recovery menu.

In the recovery menu, use the volume buttons to surf until the option «Wipe data/factory reset» and Choose this option by pressing the power button. Confirm the selection and wait for the factory reset process⁤ to complete. Once finished, ‌select the system reset option and your LG device should turn on again with factory default settings.

Remember that it will delete all custom data and settings from your device. If you continue to experience problems with your LG device, we recommend contacting LG customer service for additional assistance.

5. Verify the existence of possible physical or liquid damage to the equipment

In the event that your LG device does not turn on, it is important to check for possible physical or liquid damage. Before attempting any solution, it is essential to perform a thorough visual inspection to identify any obvious signs of damage. This could include cracks on the screen, damage to the charging ports, broken buttons or any sign of contact with liquids. Additionally,⁤ check if the equipment has suffered falls or strong impacts that may have caused internal damage.

Once the visual inspection has been carried out, it is advisable to also do a more detailed check of the equipment in search of possible internal damage. To do this, we suggest you follow the following steps:

1. Check the power cord: Make sure the charging cable is in good condition and is properly connected to both the device and the power source. If the cable appears damaged or worn, consider trying another charging cable.

2. Check the components: ⁢ Carefully inspect the charging port, the power and volume buttons, as well as any other physical component that may affect the power on of the device. Look for signs of damage, corrosion or dirt that may be interfering with its proper functioning.

3. Avoid humidity and liquids: It is essential to protect the equipment from any exposure to moisture or liquids. If you suspect that the equipment has come into contact with water or other liquids, it is important not to try to turn it on and to seek specialized technical assistance as soon as possible.

6. Contact LG technical support to get specialized help

If you have an LG device that won't turn on, it can be frustrating and worrying. Don't worry though, because there are several ways you can try to revive your device. One of the most important options is ⁤ contact ⁢LG technical support to get specialized help. LG technical support has experts who can provide you with the necessary assistance to solve the problem you are facing.

To contact LG technical support, you can follow these steps:

1. Visit the LG technical support page : On the official LG website, you will find technical support and assistance options. You can log into the website and navigate through the different sections to find the specific help you need.

2. Use online chat : LG offers​ the ⁢online ⁢chat option, where you can communicate directly with a technical support ⁢representative. This method is fast and reliable, since you can receive advice in real time and explain to them the problem you are facing.

3. Call the technical support center ⁤ : If you prefer more personal communication, you can call the LG technical support center. In many cases, they will provide a toll-free phone number so you can contact them. A technical support representative will be available⁤ to help and guide you through the troubleshooting process.

Remember that when ⁢contacting LG ‌technical support, it is important to clearly describe⁤ the problem⁢ you are experiencing. This way, they will be able to provide you with the necessary help and guide you in the process of reviving your LG device that does not turn on.

7.⁣ Consider the option‌ of seeking an authorized technical service to repair⁤ the equipment

1. Check for possible equipment power-on problems:

Before considering the option of seeking an authorized technical service, it is important to perform some checks to identify possible power-on problems on your LG device. Check if there is any visible damage⁤ to the power cord or ⁤plug. Make sure they are connected correctly and are not damaged in any way. Also, check the status of the power button on your computer to make sure it is not stuck or damaged.

2. Perform a forced restart of the computer:

In many cases, an LG device that won't turn on can be fixed⁢ simply by performing a force restart. To do this, Press and hold the power button⁤ for at least 10 seconds until the device reboots. This procedure can help you fix minor software problems and restore normal operation of your computer.

3. Consider the option of seeking an authorized technical service:

If after performing the previous steps your LG device still does not turn on, consider‌ the option of seeking‌ an authorized technical service to have it inspected and repaired if necessary. These ⁢professionals have the knowledge and tools necessary to diagnose and solve‌ any technical problem that may be affecting the device. Besides, By going to an authorized technical service, you ensure the quality and reliability of the repair, since they have the experience and support of the LG brand.

You may also be interested in this related content:

Related