Fix “blinitializelibrary failed 0xc00000bb” error Windows 10

1. Introduction to blinitializelibrary failed 0xc00000bb error in Windows 10

The “blinitializelibrary failed 0xc00000bb” error is a common problem that occurs on the operating system Windows 10. This error can occur due to various reasons such as system file issues, incompatible or corrupted drivers, software conflicts, etc. Fortunately, there are several solutions that can help you solve this problem. Below are some steps you can follow to resolve the error.

1. Update system drivers: Make sure you have the most up-to-date drivers installed on your system. You can do this by visiting your PC manufacturer's website or using reliable driver update software. Outdated or incompatible drivers can cause conflicts and lead to errors like “blinitializelibrary failed 0xc00000bb.”

2. Check the system files: If the system files are damaged or corrupted, this can also lead to the mentioned error. You can use the system file checker tool built into Windows to check and repair corrupt files. Run the following command at the command prompt as administrator: sfc /scannow. This will automatically scan and fix any system issues found.

2. Understand the causes of the blinitializelibrary failed 0xc00000bb error in Windows 10

The error blinitializelibrary failed 0xc00000bb in Windows 10 It is a common problem that can arise when starting or restarting and operating system. This error is usually related to loading boot libraries on the system and can be caused by a variety of factors. Fortunately, there are several solutions you can try to fix this problem and get your system working properly again.

One of the possible causes of the blinitializelibrary failed 0xc00000bb error in Windows 10 is a problem with the software version or drivers installed on the system. In some cases, it may be necessary to update or reinstall the software or drivers to fix the problem. To do this, you can use Windows Device Manager to check for driver updates or visit the software or device manufacturer's website and download the latest version.

Another possible solution to fix the blinitializelibrary failed 0xc00000bb error in Windows 10 is to perform a clean boot of the operating system. This will involve disabling all third-party programs and services that start automatically with Windows. You can do this by using the Windows “msconfig” utility to disable startup programs and non-essential services. Once you have performed a clean boot, check if the issue persists. If the problem disappears, you can enable the programs and services one by one until you find the cause of the problem.

3. Preliminary steps to resolve the blinitializelibrary failed 0xc00000bb error

Before proceeding with the error solution blinitializeibrary failed 0xc00000bb, it is important to take some preliminary steps to ensure that you address the issue effectively. One of the first steps you should take is to make a backup of all your files important. This is necessary to prevent data loss in case any errors occur during the troubleshooting process.

Once you have made the backup, you can begin to resolve the blinitializeibrary failed 0xc00000bb error by following these steps:

• Restart your computer to rule out possible temporary errors.
• Check if updates are available for your operating system and the programs related to the error. Install all necessary updates.
• Run a scan of your computer for malware using reliable antivirus software. If any malware is found, follow the instructions to remove it completely.

Next, try uninstalling and reinstalling the programs that are causing the blinitializeibrary failed 0xc00000bb error. Be sure to follow all uninstall steps recommended by the software manufacturer. Once the programs have been completely uninstalled, restart your computer and reinstall them from trusted sources.

4. Method 1: Update device drivers in Windows 10

To fix the device drivers issue in Windows 10, a commonly recommended option is to update them. Below are the steps to follow to perform this update correctly:

1. Identify the problematic device: Before updating the drivers, it is important to identify which device is having problems. To do this, you can open the Device Manager (accessible through a search in the Start Menu) and look for those devices that have a yellow warning icon next to them.

2. Download updated drivers: Once the device is identified, the latest drivers for that particular device should be found online. This Can be done visiting the device manufacturer's website or using a specialized driver update program.

3. Install updated drivers: once the drivers have been downloaded, you must proceed with their installation. This can be done by double-clicking the downloaded file and following the instructions of the installation wizard. In some cases, a computer restart may be required after installation.

It is important to remember that this solution may not work in all cases and that in some cases it may be necessary to seek professional assistance to resolve more complex problems. However, updating device drivers is a good practice to maintain the operating system Windows 10 functioning optimally.

5. Method 2: Perform a system file check in Windows 10

6. Method 3: Uninstall Conflicting Programs in Windows 10

Conflicting programs can be one of the main causes of problems in Windows 10. If you are experiencing crashes, unexpected shutdowns, or slowness on your system, you may have a program that is causing conflicts. Below are the steps you can follow to uninstall these programs and fix the problems:

1. Identify conflicting programs: Sometimes, it is obvious which program is causing the conflicts, since the problems occur after you have installed a particular software. However, in other cases, it may be more difficult to identify the culprit program. In those cases, you can use Windows Task Manager to determine which programs are using the most system resources.

2. Uninstall the program: Once you have identified the conflicting program, uninstall it by following these steps:

– Open the Start menu and search for “Add or Remove Programs”.
– Click on the “Add or Remove Programs” option to open the Settings window.
– In the list of installed programs, find the conflicting program and select it.
– Click the “Uninstall” button and follow the on-screen instructions to complete the uninstall process.

3. Restart the system: After uninstalling the conflicting program, restart your computer for the changes to take effect. Once the system has rebooted, check if the issue still occurs. If the problem has disappeared, you have probably solved the program conflict. If the problem persists, you can try repeating the steps above to identify and uninstall other programs that may be causing conflicts.

7. Method 4: System Restore in Windows 10 to fix blinitializelibrary failed 0xc00000bb error

To fix the 'blinitializelibrary failed 0xc00000bb' error in Windows 10, you can use Method 4 which is to restore the system. This method allows you to revert recent changes to your operating system, which can fix various problems, including this particular error.

To get started, go to the Windows search bar and type 'System Restore'. Select 'Create a restore point' from the search results to access system settings. Next, click 'System Restore' on the pop-up window.

In the System Restore window, make sure 'Show more restore points' is checked to see a full list of available restore points. Select a restore point before the 'blinitializelibrary failed 0xc00000bb' error occurred and click 'Next' to continue. It is important to note that restoring your system will revert any changes made from the selected restore point, so it is advisable to back up your important data before proceeding.

8. Method 5: Run Memory Diagnostic in Windows 10

Running memory diagnostic in Windows 10 can be an effective solution to resolve system memory related issues. This method helps identify and solve problems such as crashes, errors, or poor system performance. Here is a step-by-step guide to run memory diagnostic in Windows 10:

1. Open the start menu and search for 'Settings'.
2. Click 'Update & Security' and select 'Recovery'.
3. In the 'Restart now' section of 'Advanced Recovery', click 'Troubleshoot'.
4. Select 'Advanced Options' and then 'Memory Diagnostics'.
5. Choose between 'Restart now and check for problems' or 'Check for problems the next time the computer restarts', depending on your preferences.

After you select an option, Windows 10 will restart and perform a thorough check of the system memory for problems. This may take some time, depending on the memory size. During the process, do not turn off the computer and let it complete its task. Once the check is finished, Windows will reboot again and display the results on the screen login.

If memory problems are detected, Windows 10 will try to correct them automatically. If you are unable to resolve the issue, you will be provided with additional details and options to resolve the issue. Remember that it is important to perform a memory diagnostic regularly to maintain optimal operating system performance. With this method, you will be able to identify and fix memory-related problems in Windows 10 effectively.

9. Method 6: Perform a clean boot in Windows 10

A clean boot in Windows 10 can be helpful in fixing performance issues or software conflicts. When performing a clean boot, the operating system starts with only essential services and programs, which helps identify and resolve conflicts that may be affecting the proper functioning of your computer.

To perform a clean boot in Windows 10, follow these steps:

• Open the "Run" dialog box by pressing the keys Windows + R.
• Type “msconfig” in the search box and press Enter to open the “System Settings” window.
• In the “General” tab, select the “Selective Startup” option.
• Uncheck the “Load startup items” option to disable all programs that start automatically with Windows.
• Next, go to the “Services” tab and check the “Hide all Microsoft services” box.
• Uncheck the boxes for non-Microsoft services to disable them.
• Click “OK” and then “Restart” to apply the changes and reboot the system.

Once the system reboots, it will run in clean boot and only essential services and programs will load. This will allow you to identify if any particular program or service is causing problems on your computer. If the problem goes away with a clean boot, you can enable programs and services one by one to determine which one is causing the interference.

10. Method 7: Reinstall or repair the application or program causing the error

Sometimes, errors in an application or program can be due to a problem in its installation or corrupt files. If you have tried other solutions without success, reinstalling or repairing the application could be the key to fixing the problem. Follow these steps to perform this task:

1. Open the settings section of your operating system and look for the “Programs” or “Applications” option.
2. In the list of installed programs, find the one that is causing the error and click on it.
3. From the available options, choose the one that allows you to reinstall or repair the program. This option may vary depending on the operating system and application version.
4. Follow the on-screen instructions to complete the reinstallation or repair process. You may be prompted to reboot your system upon completion.

Once the application or program has been reinstalled or repaired, it is advisable to restart your computer to ensure that the changes take effect. If the error persists after this step, you may need to seek additional help or consider other solutions.

Please note that this method may result in the loss of some custom settings or data saved in the application or program. If you have important information stored, we recommend making a backup copy before proceeding with reinstallation or repair. Also, make sure you have access to the latest version of the program or an installation copy to avoid additional problems.

11. Method 8: Run a virus and malware scan on Windows 10

To run a virus and malware scan on Windows 10, you have several options. Below are three recommended methods:

Method 1: Windows Defender

• Open Windows Defender from the Start menu or by searching for it in the taskbar.
• Click on the “Virus & Threat Protection” tab.
• Select “Advanced scan options” and then “Full scan”.
• Click “Scan Now” and wait for the scan to complete.
• If any virus or malware is found, follow the instructions in Windows Defender to remove or quarantine it.

Method 2: Malware Removal Tools

• Download a reliable malware removal tool, such as Malwarebytes or Avast.
• Run the tool and follow the installation instructions.
• Once installed, perform a complete scan of your system for viruses and malware.
• If any threats are detected, follow the tool's instructions to remove or quarantine them.

3 method: Safe Mode and antivirus scanning

• Restart your computer and repeatedly press the F8 key until the advanced startup options menu appears.
• Select “Safe Mode with Networking” and press Enter.
• Once in safe mode, run your antivirus program and perform a full system scan.
• If any virus or malware is found, follow the antivirus instructions to remove or quarantine it.

12. Workaround: Temporarily disable antivirus and firewall in Windows 10

If you are experiencing problems when trying to install or run certain programs in Windows 10, it is possible that your antivirus or firewall is interfering and causing conflicts. In this case, a workaround may be to temporarily disable these security tools to allow the desired program to be installed or run.

Below are the steps required to temporarily disable antivirus and firewall in Windows 10:

Step 1: Open the Windows 10 start menu and select the “Settings” option.

Step 2: In the settings window, click on the “Update & Security” option.

Step 3: In the “Windows Security” section, select “Firewall and network protection.”

Step 4: In the next window, click “Private networks” to disable the firewall for private network connections.

Step 5: Repeat step 4 for “Public Networks” and “Domain Networks” if you want to disable the firewall for these connections as well.

Step 6: To temporarily disable your antivirus, find your antivirus icon in the Windows taskbar and right-click on it.

Step 7: Select the “Temporarily disable” option or similar from the context menu.

Remember that temporarily disabling your antivirus and firewall can expose your computer to security threats. Therefore, it is recommended to re-enable these tools once you have completed the installation or execution of the desired program. Also, be sure to only download programs from trusted sources and run regular security scans on your system to protect it at all times.

13. FAQ about blinitializelibrary failed 0xc00000bb error in Windows 10

Below is a list of frequently asked questions about the “blinitializelibrary failed 0xc00000bb” error in Windows 10 and how to fix it:

• What is the “blinitializelibrary failed 0xc00000bb” error?
  The “blinitializelibrary failed 0xc00000bb” error is an error message that may appear when trying to start certain applications or games in Windows 10. This error indicates that the graphics library required to run the program could not be correctly loaded.
• How can I fix the error?
  To fix the “blinitializelibrary failed 0xc00000bb” error, you can follow these steps:
• 1. Update your graphics card drivers: Make sure you have the latest drivers for your graphics card installed. You can download them from your card manufacturer's website.
• 2. Run the compatibility troubleshooter: Windows 10 has a built-in compatibility troubleshooting tool. Right-click the icon for the program or game that displays the error, select “Fix compatibility issues,” and follow the instructions.
• 3. Check the system requirements of the program or game: Make sure your system meets the minimum hardware and software requirements of the program or game you are trying to run.
• >>>>>>4. Disable fast startup: Some users have reported that disabling the Windows 10 fast startup feature has fixed the error. You can disable this feature by going to Settings System Power and sleep Additional power settings Choose the behavior of the power buttons Change currently unavailable settings Turn off the “Enable fast startup” option.

14. Conclusions and recommendations to solve the blinitializelibrary failed 0xc00000bb error in Windows 10

1. Update drivers: Sometimes the error blinitializelibrary failed 0xc00000bb in Windows 10 can be caused by outdated or incompatible drivers. To solve this problem, it is advisable to update the drivers of the devices installed on your computer. You can do this manually by visiting the manufacturer's website for each device and downloading the latest versions of the drivers. Alternatively, you can use tools like Driver Booster or DriverEasy to automatically scan and update all the drivers on your system.

2. Verify the integrity of system files: The error blinitializelibrary failed 0xc00000bb It can also occur due to corrupted or missing system files. To fix this problem, you can use the Windows SFC (System File Checker) tool. Open a command window with administrator privileges and run the command sfc /scannow. This command will scan all system files for problems and automatically repair them if possible.

3. Run a malware scan: In some cases, the error blinitializelibrary failed 0xc00000bb It may be related to the presence of malware on your system. To ensure your computer is free of malware, we recommend running a full scan using a reliable antivirus tool. Make sure your antivirus is updated and run a thorough scan of your system. If any malware is detected, follow the recommendations provided by your antivirus to clean and remove any threats found.

In conclusion, fixing the “blinitializelibrary failed 0xc00000bb” error on Windows 10 may seem like a challenging task, but with the information and solutions provided, it is possible to resolve this issue effectively. It is important to note that this error is related to Windows operating system corruption or hardware driver issues.

If you have tried all the suggested solutions and still cannot resolve the issue, it is advisable to seek additional help, either online or by contacting Microsoft support. Remember that it is always important to make sure you have backup copies of your data before making changes to the operating system. Preventing future errors is also essential, so it is recommended to keep the operating system and drivers updated regularly.

We hope this article has been helpful in resolving the “blinitializelibrary failed 0xc00000bb” error in Windows 10 and that you have been able to get your operating system back to normal. Remember to follow the steps carefully and consult reliable sources to get more information on solving technical problems in Windows 10.

You may also be interested in this related content:

• How to Put a Photo on Whatsapp Profile
• Socket LGA 1150: Which processors are suitable?
• How to Connect Phone to TV via Bluetooth?