How to Install Windows 10 from a USB?

Campus Guides
2023-08-09T19:14:11+00:00

How to install windows 10 from a usb

How to Install Windows 10 from a USB?

In the world of technology, the operating systemWindows 10 It is one of the most popular options and widely used by millions of users around the world. If you are thinking about installing Windows 10 on your computer, one of the most efficient and fastest ways to do it is through a USB. In this article, we will present you with a detailed technical guide on how to install Windows 10 from a USB, which will allow you to enjoy all the new features and improvements of this operating system in a simple and practical way. Keep reading to discover all the steps necessary to achieve this successfully.

1. Requirements to install Windows 10 from a USB

In order to install Windows 10 from a USB, you must make sure you meet the necessary requirements. Next, we will explain what these requirements are so that you can carry out the installation successfully.

1. A USB pendrive with sufficient capacity: You will need a USB with a capacity of at least 8GB to be able to save the installation file Windows 10. Remember that using the USB for this task will delete any other content on it, so be sure to do a Backup important files.

2. Microsoft Media Creation Tool: To prepare the USB with the Windows 10 installation file, you need to use the Microsoft Media Creation Tool. You can download this tool for free from the official Microsoft website. Once downloaded, follow the instructions to create USB installation media using the wizard provided.

2. Step by step: Preparing the USB for the installation of Windows 10

Next, we will tell you the necessary steps to prepare the USB that you will use to install Windows 10. Follow these instructions carefully:

Step 1: Start by formatting the USB in NTFS format. You can do this by connecting the USB to your computer and opening “Disk Manager” from the start menu. Then select the USB and choose the format option, make sure to select the NTFS file system before confirming the format.

Step 2: Once the formatting is complete, download the Windows Media Creation Tool from the official Microsoft site. This tool will allow you to create a bootable USB with the files necessary for the installation of Windows 10. Make sure you download the version that corresponds to your operating system figure.

Step 3: Run the media creation tool and choose the “Create installation media for another PC” option. Next, select the language, edition, and architecture of Windows 10 you want to install. Next, select the “USB Flash Drive” option as the media type. Choose the USB that you formatted in Step 1 and follow the instructions to create the installation USB.

3. Create a USB bootable drive for Windows 10 installation

To be able to install Windows 10 in a computer, sometimes it is necessary to create a USB bootable drive. This drive allows you to boot the operating system installation from USB instead of using a physical disk. Next, we will show you the steps to create a USB bootable drive:

Step 1: The first thing you will need is a USB flash drive with enough capacity to store the Windows 10 installation files. Make sure the USB flash drive is empty, as all data will be deleted during the process.

Step 2: Download the Microsoft Media Creation Tool from its official website. This tool allows you to create a Windows 10 ISO file or copy the installation files to the USB stick directly. Follow the instructions on the page to download and install the tool on your computer.

Step 3: Open the media creation tool and select the “Create installation media for another PC” option. Then choose the language, edition, and architecture of Windows 10 you want to install. When asked what type of media you want to create, select “USB Flash Drive.” Connect the USB stick to your computer and select the corresponding drive in the tool. Click “Next” and wait for the installation files to be copied to the USB stick. Once the process is complete, you will have a bootable USB drive ready to install Windows 10 on any compatible computer.

4. Set the boot order to install Windows 10 from USB

To install Windows 10 from a USB, you need to configure the boot order in your computer's BIOS. Follow these steps to do it:

  1. Restart your computer and press the corresponding key to enter the BIOS (usually it is F2, F10 or Del).
  2. In the BIOS, navigate to the “Boot” section.
  3. You will find a list of boot devices. Use the arrow keys to select the USB on which you have the Windows 10 installation file.
  4. Move the USB to the top of the list using the «+» or «-« keys.
  5. Save the changes and restart the computer.

Once you have correctly configured the boot order, your computer will boot back up and begin the Windows 10 installation process from USB. Be sure to follow the on-screen instructions to complete the installation.

Keep in mind that the names and locations of settings in the BIOS may vary depending on your computer manufacturer. If you're having trouble finding the boot order option, check your device's user manual or visit the manufacturer's support website for more information.

5. Starting the Windows 10 installation process from USB

Before starting the Windows 10 installation process from USB, make sure you have a USB with at least 8GB capacity and a downloaded Windows 10 ISO file. Then follow these steps:

1. Plug the USB into your computer and make sure it doesn't have any important data on it as it will be formatted during the process.

2. Open the “Create a recovery drive” application on your computer. This app is native to Windows 10 and can be found by searching for it in the start menu.

  • Note: If you don't have Windows 10 on your computer, you can download the “Media Creation Tool” from Microsoft's official website and follow the steps to create a USB installation drive.

3. Follow the instructions in the app to select the connected USB drive and the downloaded Windows 10 ISO file. Make sure the “Create a copy of the Windows installation files on this drive” option is checked.

  • Note: If you already have a copy of the Windows 10 installation files on your USB, you can select the “Use Windows installation files already stored on this drive” option instead of the previous option.

6. Selection of language and time settings when installing Windows 10 from USB

When installing Windows 10 from a USB, it is important to select the language and correctly configure the time zone to ensure optimal operation of the operating system. Below are the steps to make this selection:

1. When you start the installation from the USB, a welcome screen will be displayed where you can select the desired language. It is important to choose the language to be used in and operating system, as it will determine the initial configuration and user interface language.

2. Once the language is selected, a time and currency settings window will be displayed. In this window, you must choose the time zone corresponding to where the user is located. It is essential to correctly select the time zone, as this will affect the operating system's clock synchronization and other time and date-related settings on your computer.

7. Custom settings while installing Windows 10 from USB

Installing Windows 10 from USB is a convenient option for those who want to install the operating system on a computer without an optical disk drive. However, you may want to make custom configurations during the installation process to tailor the experience to your specific needs. Below are the steps to make these custom settings:

1. Preparation of the installation USB: Before you begin, make sure you have a USB of at least 8GB capacity and a Windows 10 ISO image. Use a media creation tool, such as Windows 10 Media Creation Tool, to create the installation USB. Connect the USB to the computer you want to install and reboot the system.

2. Boot Configuration from USB: During the reboot process, enter your computer's BIOS or UEFI settings by pressing the designated key, which is usually F2, F10, or Esc. Navigate to the boot section and set the boot priority so that the installation USB be the first option. Save the changes and restart the computer again.

3. Setting options during installation: Once the computer boots from the installation USB, a window will open with several options. Here you can select the language, keyboard layout and other preferences. Additionally, you can click “Customize” to access advanced options such as partitioning the HDD, select the installation location, and set a password for the administrator account. Make the desired settings and follow the on-screen instructions to complete the Windows 10 installation.

8. Partitioning process and selecting Windows 10 installation drive from USB

In this section, the . These steps are essential for a successful installation of the operating system on your computer.

1. First, make sure you have a USB of at least 8 GB capacity and that it is formatted in NTFS format. If you don't have one, you can perform this process on another computer or buy a new one.

2. Connect the USB to your computer and make sure you have the Windows 10 installation files on it. If you don't have them, you can download them from the official Microsoft website.

  • If you already have the installation files, continue with the next step.
  • If you need to download the files, follow the instructions on the official website to create installation media on a USB.

3. Open your computer's start menu and select the boot option. If you don't see this option, you may need to go into BIOS Setup to enable booting from a USB device.

9. Copying files and setting up Windows 10 from USB

To copy files and configure Windows 10 from a USB, follow these simple steps. First, make sure you have a USB with enough capacity to hold the Windows 10 image. You can download it from the official Microsoft website. Then, connect the USB to your computer.

Once the USB is connected, restart your computer and enter boot settings. This is usually done by pressing the "F12" or "ESC" key during boot, depending on the brand of your computer. On the screen boot configuration, select USB as the default boot device and save the changes.

After saving the changes, the computer will reboot again and you should now boot to the USB. This is where the installation of Windows 10 begins. Follow the on-screen instructions to set the language, time zone, and other preferences. Be sure to select "Custom installation" when prompted, so you can choose the appropriate partition you want to install Windows 10 on. Once you've made all your selections, the installation process will begin and you'll just have to wait for it to complete.

10. Account and password settings during Windows 10 installation from USB

The is an important process to ensure security and proper access to your operating system. Below are the steps to follow to configure your accounts and password during this process:

Step 1: Once you have started the Windows 10 installation process from USB, an initial setup window will appear. In this window, select the language, time, and keyboard you want to use.

Step 2: You will then be asked to choose an account setup option. If you wish create a Microsoft account To access all Microsoft services, select “Create a new Microsoft account.” If you prefer to use a local account without an Internet connection, select "Create a local user account."

Step 3: After choosing your account setup option, a window will appear to set your password. Enter the password you want to use to log in to your account. Make sure you choose a strong password that contains a combination of letters, numbers, and special characters.

11. Windows 10 updates and additional settings from USB

If you are still having problems updating and configuring Windows 10, a viable option is to perform these processes through a USB device. Next, we will explain how to carry out this procedure in a few simple steps.

First of all, make sure that you have a USB that is at least 8 GB in capacity and that it does not contain any important information, as it will be formatted during the process. Then, download the Windows 10 Media Creation Tool from the official Microsoft website. Once the tool is downloaded, open it and select the option “Create installation media (USB flash drive, DVD or ISO file) for another PC”.

Next, connect your USB to your computer and follow the tool's instructions to select the language, edition, and architecture of Windows 10 you want to install on the device. Once the options are selected, click “Next” and choose the “USB Flash Drive” option. Select the USB on which you want to create the installation media and click "Next." The tool will start downloading the necessary files and creating the Windows 10 installation USB.

12. Installing drivers and software after installing Windows 10 from USB

Once you have completed the installation of Windows 10 from a USB drive, it is important to ensure that all the necessary drivers and software are correctly installed on your system. Below are the steps to follow to carry out this task and ensure that your system runs smoothly.

  1. The first thing you should do is check if there are any driver updates available. To do this, go to your device manufacturer's website and look for the support or driver downloads section. Download and install the latest versions of drivers for your devices.
  2. Once the drivers are updated, it's time to install the necessary software. To do this, check if there are programs or utilities provided by the manufacturer that are compatible with your operating system. Download and install these programs to get the full functionality of your devices.
  3. In addition to the manufacturer's drivers and software, it is also advisable to install additional applications to improve the security and performance of your system. Some suggestions may include antivirus programs, data backup tools and system optimizers. Be sure to download these apps from trusted sources and keep them updated for optimal protection.

By following these steps, you can complete the installation of drivers and software after installing Windows 10 from a USB drive. Always remember to check the compatibility of drivers and programs with your operating system to avoid incompatibility problems. Enjoy your Windows system 10 correctly configured and ready for use!

13. Troubleshooting and FAQs when installing Windows 10 from USB

If you are experiencing problems when trying to install Windows 10 from a USB, don't worry, there are solutions available to resolve the most common problems. Below you will find a series of frequently asked questions and solutions to guide you through the installation process:

1. How to create a bootable USB to install Windows 10?
To create a bootable USB, you will need a USB drive with at least 8GB of available space and a Windows 10 Media Creation Tool. You can download this tool from the official Microsoft website and follow the steps in the tutorial. Make sure you select the “Create installation media for another PC” option and follow the instructions carefully.

2. Why doesn't my computer recognize the Windows 10 installation USB?
There are several reasons why your computer may not recognize the Windows 10 installation USB. Check that the USB is properly formatted in NTFS or FAT32 format, and make sure your computer allows booting from USB in the BIOS settings. If the problem persists, try using another USB port or check if USB is working properly on another computer.

3. What should I do if my Windows 10 installation is stuck or showing errors?
If your Windows 10 installation is stuck or showing errors, you can try to fix the problem by restarting the installation from scratch. Make sure you follow the installation steps correctly and select the custom installation option. If the problem persists, you can try using the Windows troubleshooting tool or contact Microsoft Support for additional assistance.

14. Tips and recommendations for a successful installation of Windows 10 from a USB

Here you will find some tips and recommendations to ensure a successful installation of Windows 10 from USB. Before you begin, make sure you have a USB with at least 8GB capacity available and a copy of the Windows 10 installation file.

1. Format the USB: To prepare the USB correctly, it is important to format it in the FAT32 file system. This Can be done easily using the Windows formatting utility or via the command line. Remember that this process will erase all data on the USB, so be sure to back up any important information.

2. Create a bootable USB drive: Use the Microsoft Media Creation Tool to create a bootable USB drive. This tool will guide you through the steps necessary to select the language, architecture, and edition of Windows 10 you want to install. Make sure to select USB as the destination location and allow the tool to create the bootable drive.

In short, installing Windows 10 from a USB is an efficient and simple option for those who want to have the latest operating system on their computer. Through this method, the need to use disks or optical drives is eliminated, saving time and simplifying the installation process. In addition, it allows the installation to be customized according to the user's individual needs.

However, it is important to take into account some aspects and precautions during the process. Ensuring you have a quality USB drive of sufficient size, as well as having a backup copy of important files, can avoid problems and loss of information. Following the steps and recommendations provided in this article, as well as consulting the official Microsoft documentation, is essential to ensure a successful installation.

We hope this article has been useful and has given you the necessary information to successfully install Windows 10 from a USB. Remember that, if you have any questions or difficulties, it is always advisable to seek additional advice or contact the corresponding technical support. Now you are ready to enjoy all the features and improvements that Windows 10 offers!

You may also be interested in this related content:

Related