How to Connect⁤ HP DeskJet 2720e to My Wi-Fi Network? If you have recently purchased an HP printer ⁤DeskJet 2720e and you want to connect it to your Wi-Fi network, you are in the right place. Connecting the printer to your Wi-Fi network is essential to be able to print wirelessly from any device in your home or office. Follow these simple steps to set up your printer and enjoy the convenience of printing without cables.

Step by step -- How to Connect HP DeskJet 2720e to My Wi-Fi Network?

How to Connect HP DeskJet 2720e to My Wi-Fi Network?

• Step 1: Turn on the HP printer DeskJet 2720e and make sure it is in the “Ready” state.
• Step 2: Locate the control panel on the front from the printer.
• Step 3: Press⁤ the Wi-Fi button⁣ (the icon with three waves).
• Step 4: Choose the “Set up new Wi-Fi connection” option from the drop-down menu that appears on the printer screen.
• Step 5: Wait for the printer to find available Wi-Fi networks.
• Step 6: Select your Wi-Fi network from the list of options displayed on the printer screen.
• Step 7: If your Wi-Fi network is password protected, enter the password using the numeric keypad on the screen the printer.
• Step 8: Confirm the Wi-Fi connection details and make sure they are correct.
• Step 9: Click “Connect” or “OK” to establish the Wi-Fi connection between the printer and your network.
• Step 10: Wait for the printer to connect to your Wi-Fi network.⁣ This may take a few seconds.
• Step 11: Once the ‌connection has been successfully established, the printer ⁢will display a confirmation message on the screen.
• Step 12: Test the connection by printing a test⁤ page or any document from your device connected to the Wi-Fi network.

FAQ

Questions and Answers – How to Connect HP DeskJet⁤ 2720e to My Wi-Fi Network?

1. What are the prerequisites⁤ to ‌connect the HP DeskJet​ 2720e printer to the Wi-Fi network?

Before you begin, make sure you have the following:

1. Wi-Fi network name (SSID) and password.
2. Make sure the printer is turned on and in setup mode.
3. A computer or mobile device connected to the same network Wi-Fi access.

2. How do I put the HP DeskJet 2720e⁣ printer into setup mode?

Follow these steps to put the printer into setup mode:

1. Turn on the⁢ printer and wait for it to be ready.
2. Press and hold the "Cancel" button and the "Wi-Fi" button at the same time until the Wi-Fi light flashes.

3. How can I connect the HP DeskJet 2720e printer to my Wi-Fi network from a Windows computer?

Below you will find the steps to connect your printer to the Wi-Fi network from a Windows computer:

1. Open the Windows Settings menu and select “Devices.”
2. Click “Printers​ and scanners”‌ and then “Add a printer or scanner.”
3. Select your hp printer from the list and click “Add device”.
4. Follow the on-screen instructions to complete the ⁤Wi-Fi network setup.

4. What is the process to connect the HP DeskJet 2720e printer to my ‌Wi-Fi network from an Android mobile device?

Follow these steps on your Android device To connect the printer to the Wi-Fi network:

1. Open your device's settings and select "Wi-Fi."
2. Find and select⁢ the name of your HP printer's Wi-Fi network.
3. Enter the Wi-Fi network password when prompted.
4. Wait for your device to connect to the printer and confirm the successful connection.

5. What are the steps to connect the HP DeskJet 2720e printer to my Wi-Fi network from an iOS mobile device?

Follow these steps on your iOS device To connect the printer to the Wi-Fi network:

1. Access settings from your device and select “Wi-Fi”.
2. Find and select the name of your HP printer's Wi-Fi network.
3. Enter the Wi-Fi network password if prompted.
4. Wait for your device to connect to the printer and confirm the successful connection.

6. How can I verify that the HP DeskJet⁢ 2720e printer is properly connected to my Wi-Fi network?

Follow these steps to check your printer's Wi-Fi connection:

1. Prints a network configuration report from the HP printer.
2. See if the printer's IP address is on the same subnet as your computer or mobile device.
3. If the IP address matches, your printer is correctly connected to the Wi-Fi network.

7. Can I connect the HP DeskJet 2720e printer to a Wi-Fi network without a password?

No, you will need a password to connect your HP printer to a protected Wi-Fi network.

8. Is it possible to change the Wi-Fi network to which the HP DeskJet 2720e printer is connected?

Yes, you can change the Wi-Fi network of your HP printer using the following settings:

1. Access the printer's network settings.
2. Select​ the “Wi-Fi” option and then “Change Wi-Fi network”.
3. Follow the on-screen instructions to connect your printer to a new Wi-Fi network.

9. Where can I find the network name (SSID) and password for my Wi-Fi network?

To find the network name⁤ and password of⁤ your Wi-Fi network, you can follow these steps:

1. Check the Wi-Fi router or modem provided by your Internet service provider.
2. Look for a sticker on your router that indicates the network name (SSID) and password.
3. If you cannot find the information, contact your Internet service provider for assistance.

10. What should I do if I face problems connecting the HP DeskJet 2720e printer to my Wi-Fi network?

If you are having trouble connecting your HP printer to your Wi-Fi network, try the following steps:

1. Make sure you are following the setup steps correctly.
2. Verify that the Wi-Fi network password is correct.
3. Restart both the printer and the Wi-Fi Router.
4. If the problem persists, consult the printer's user manual or contact HP customer service for assistance.

You may also be interested in this related content:

• What devices are compatible with Firewire?
• The Z3 Computer
• How does a drill work and what is it used for?